Geothermal energy— geo (earth) + thermal (heat) —is heat energy from the earth.
WHAT IS A GEOTHERMAL RESOURCE?
Geothermal resources are reservoirs of hot water that exist at varying temperatures and depths below the Earth’s surface. Mile-or-more-deep wells can be drilled into underground reservoirs to tap steam and very hot water that can be brought to the surface for use in a variety of applications, including electricity generation, direct use, and heating and cooling. In the United States, most geothermal reservoirs are located in the western states…>>
THERE ARE THREE BASIC TYPES OF GEOTHERMAL POWER PLANTS:
Dry steam plants use steam piped directly from a geothermal reservoir to turn the generator turbines. The first geothermal power plant was built in 1904 in Tuscany, Italy, where natural steam erupted from the Earth.
Flash steam plants take high-pressure hot water from deep inside the Earth and convert it to steam to drive the generator turbines. When the steam cools, it condenses to water and is injected back into the ground to be used over and over again. Most geothermal power plants are flash steam plants.
Binary cycle power plants transfer the heat from geothermal hot water to another liquid. The heat causes the second liquid to turn to steam which is used to drive a generator turbine….learn more>> www.eia.doe.gov
LOCATION MAP OF GEOTHERMAL
Most of the geothermal power plants in the United States are in western states and Hawaii, where geothermal energy resources are close to the earth’s surface. California generates the most electricity from geothermal energy. The Geysers dry steam reservoir in northern California is the largest known dry steam field in the world and has been producing electricity since 1960.
(Information from EIA.GOV)
interactive map>> maps.nrel.gov/geothermal-prospector
This geothermal map shows current and planned power generation capacity by state. www.nrel.gov
OPERATING AND DEVELOPING POWER PLANTS
Developing geothermal projects and operating geothermal power plants information aggregated from the Geothermal Energy Association. www.nrel.gov
WHAT ARE ENHANCED GEOTHERMAL SYSTEMS
EGS are engineered reservoirs created to produce energy from geothermal resources that are otherwise not economical due to lack of water and/or permeability. EGS technology has the potential for accessing the earth’s vast resources of heat located at depth to help meet the energy needs of the United States. energy.gov
INSTALLED GENERATING CAPACITY ON OUR PLANET
Top 10 Geothermal Countries based on installed capacity – Year End 2017 thinkgeoenergy.com
HOW DOES GEOTHERMAL COMPARE TO OTHER ENERGY SOURCES?
…The initial costs of geothermal energy are high — wells can cost $1 to $4 million each to drill, and installation of a home geothermal pump system can run as much as $30,000 [sources: REPP, Consumer Energy Center]. However, a home geothermal energy pump can cut energy bills by 30 to 40 percent and will pay for itself within 5 to 10 years [source: Consumer Energy Center]. >>
HOW WE USE GEOTHERMAL ENERGY
The uses of geothermal energy in homes, farming, industry, infrastructure, and electricity.
Geothermal energy has more uses than you might imagine. Basically, geothermal energy technology taps into subsurface areas where desired temperatures exist. The uses of geothermal energy range depending on the needs.
– Uses of Geothermal Energy for Houses
– Uses of Geothermal Energy in Farming
– Uses of Geothermal Energy in Industry